Project examples: what typical garage and business floor coatings look like and what they cost
Epoxy Floors Field Clovis shows worked examples of typical Clovis area projects — the floor and how it is used, the hardware involved and the market price range such a job carries. Every picture is an AI concept illustration; no installation was performed or arranged through this site.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Worked example pages. The pictures are AI concept illustrations, not photographs; no installation was performed or arranged through this site; prices are typical Clovis area market ranges, not quotes.
Illustration
Worked case: a three-car flake epoxy garage on a young tract slab in Harlan Ranch, custom blend and moving included
Worked example for a three-car garage in Harlan Ranch: 700 square feet of full-broadcast flake epoxy on a sound but young tract slab, the moisture test before the date is trusted, a custom flake blend, moving the contents and typical price ranges.
Typical total: $3,750–$6,300 (market range, not a quote) · Related service: Flake Epoxy Garage Floors
Illustration
Worked case: removing an old coating and treating oil and damp spots in a two-car garage near Old Town, then polyaspartic flake
Worked example for a two-car garage on an older street near Old Town Clovis: 400 square feet, an old coating ground off, oil and a damp corner treated, polyaspartic flake over an epoxy base, stem wall and steps coated, with typical price ranges.
Typical total: $3,850–$7,500 (market range, not a quote) · Related service: Garage Floor Coating Removal and Recoating
Illustration
Worked case: a one-car solid-color epoxy garage in Loma Vista, hairline cracks repaired and the contents moved
Worked example for a one-car garage in Loma Vista: 240 square feet of solid-color epoxy with fine grit on a recent slab with hairline cracks, moving the contents, ventilation in a small room and typical price ranges for a small job.
Typical total: $1,110–$2,320 (market range, not a quote) · Related service: Solid-Color Epoxy Garage Floors
Illustration
Worked case: a 4,000-square-foot warehouse unit in Yosemite Business Park, aisles striped and the work phased
Worked example for a 4,000-square-foot unit in an older multi-tenant industrial complex: gritted solid-color epoxy on a sound but worn slab, aisle striping, landlord consent, work in zones around the dock and typical price ranges.
Typical total: $12,300–$28,900 (market range, not a quote) · Related service: Warehouse Floor Coating
Illustration
Worked case: an 1,800-square-foot retail showroom floor in the Sierra Vista Mall district, joints filled and work in zones
Worked example for an 1,800-square-foot showroom near a regional shopping center: decorative flake epoxy on a sound slab, saw-cut joints filled, landlord consent, work in zones while the store stays open and typical price ranges.
Typical total: $11,200–$22,800 (market range, not a quote) · Related service: Retail and Showroom Epoxy Floors
Illustration
Worked case: a 700-square-foot restaurant kitchen in urethane cement with a coved base, Old Town Clovis
Worked example for a restaurant kitchen in an older Old Town Clovis building: 700 square feet of urethane cement with cracks repaired and a coved base, landlord consent, the Fresno County plan check steps and typical price ranges per square foot.
Typical total: $9,200–$17,200 (market range, not a quote) · Related service: Commercial Kitchen Flooring
About these examples
Each example is a hypothetical, typical project for a kind of garage or business floor that is common in the Clovis area. Every picture is a concept illustration, AI-generated — not a photo of a completed installation — showing the kind of floor the scenario describes. The prices are the same market ranges used by the availability check, shown as ranges because an installer prices the actual job after seeing the floor.
What the ranges include
Each table starts from the per-square-foot range for the coating system, adds the slab-condition surcharge or surcharges, multiplies by the floor area and then adds the flat options that define the scenario — a stem wall, entry steps, a cove base, joint filling. Add-ons listed under an example are priced the same way. Nothing in these pages is an offer; the ranges describe what such work typically costs locally.
How to use them
Find the example closest to your floor, note the materials and prep it calls for and the typical range, then run the availability check below with your own floor area, the coating system and the slab condition — the range it shows is built from the same table.
Check availability and get your price range
Bookings aren't open yet — a typical Clovis range in about 30 seconds.