Epoxy Garage Floors in Dry Creek Business Park, CA
Epoxy Floors Field Clovis covers epoxy and commercial floors in Dry Creek Business Park, the business park north of Herndon Avenue between Minnewawa Avenue and Highway 168, where newer lots mean slabs that are young compared with the older parts of the city.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
A park that added lots
Dry Creek Business Park sits north of Herndon Avenue between Minnewawa Avenue and Highway 168. A 2016 expansion added 44 lots on about 30 acres, with a city investment of $3 million, according to a business-press report. The report names no uses, and this page does not guess which businesses occupy the lots; a business park of this kind normally holds shops, offices with storage and light-industrial units. Because the lots are newer, many floors are slab-on-grade concrete without an earlier coating to remove.
At a glance:
| Factor | What to expect in Dry Creek Business Park |
|---|---|
| Buildings | Business-park buildings on newer lots, owner-occupied or leased |
| Floors | Slab-on-grade with saw-cut joints; bare or sealed |
| Slabs | Young concrete; moisture and shrinkage cracks are the usual questions |
| Approvals | The owner or the landlord, depending on who holds the building |
| Typical systems | Gritted solid color for shop and storage floors, flake for customer areas |
Garage and business floor coatings in Dry Creek Business Park
Business park owners ask about:
Saw cuts and shrinkage cracks
A repair and joint-fill line is common on a floor this size, and the estimator's repair modifier adds $1–$3 per square foot.
Shop floor or customer floor
Solid-color epoxy with grit costs $3–$7 per square foot, and a showroom counter area in flake costs $6–$12.
Keeping the doors working
A roll-up door that stays closed for a cure leaves a hot building, so the work is planned around temperature as much as around orders.
Open lots, hot slabs
A building with a metal roof and roll-up doors collects heat, and the slab can run warmer than the air around it. Installers measure the slab temperature, choose the early hours and keep fans running; fast-curing products have less working time on a July afternoon, when the mean high is 97°F. Dust from neighboring construction can also blow through open doors, which is why the floor is swept and the door opening is managed before each coat.
Epoxy floors in Dry Creek Business Park: questions
Can a business park unit stay in operation during the job?
Often in phases, zone by zone or after hours. The order of zones is planned before the first coat, and the data sheet sets the return time for each.
Does a newer slab still need prep?
Yes. Even a clean new slab is ground to open the surface, any sealer is removed and moisture is checked, because a coating bonds to the slab it sees.
Check availability and prices in Dry Creek Business Park
Bookings aren't open yet — a typical Clovis range in about 30 seconds.